Archive
United We Stand US Flag Map 42″ x 78″ Magnetic Garage Banner For Steel Garage D
United We Stand US Flag Map 42″ x 78″ Magnetic Garage Banner For Steel Garage Doors Dress up your steel garage door with this beautiful United We Stand US Flag Map magnetic garage door magnet. This large magnetic banner is designed to fit in two sections on most standard steel sectional garage doors. Because it is magnetic it stays put when you open and close the garage door. Please NOTE the following BEFORE purchasing. This is for steel doors only. Check your door with a magnet. If the magnet sticks your door is steel. If not it is probably aluminum or wood. Your sections need to be 21″ tall, which is the standard size for most doors. Unlike other garage door banners, no other parts have to be purchased. Simply unroll, line it up with the section, and smooth it out. Surface should be clean before attaching. The images show the flag (banner) attached to the most common garage door sizes; 8 feet and 16 feet by 7 feet high. Printed with UV inks, these banners resist fading. How to use our Garage Door Banners. The surface you put the magnet on needs to be clean. Typically you can just wipe it with a clean cloth. The magnet needs to be pliable when you put it up. If it has been in storage for awhile or it is cold, you may need to heat it in the sun (lay it flat) or in the house until it is pliable. With the larger sizes it helps to have two people to line it up. Magnets have a mind of their own. For storage, if you can lay it on a flat surface that is the best. But most of us need to roll and store. Roll it with the print face out. That helps when you go to put it up to make the curl go against the door and not away from it. Don’t roll it tight. The looser you can roll it the better. Over time the magnet will conform to the contours of the door it is on. When you go to store it, lay it on a flat surface in the sun (on a warm day) and most of the contours will straighten out. Prestalia e-commerce solutions.
Read moreHe Is Risen Magnetic 42″ x 84″ Garage Banner For Steel Garage Doors
He Is Risen Magnetic 42″ x 84″ Garage Banner For Steel Garage Doors Dress up your steel garage door with this beautiful He Is Risen Magnetic 42″ x 84″ Garage Banner For Steel Garage Doors magnetic garage door magnet. This large magnetic banner is designed to fit in two sections on most standard steel sectional garage doors. Because it is magnetic it stays put when you open and close the garage door. Please NOTE the following BEFORE purchasing. This is for steel doors only. Check your door with a magnet. If the magnet sticks your door is steel. If not it is probably aluminum or wood. Your sections need to be 21″ tall, which is the standard size for most doors. Unlike other garage door banners, no other parts have to be purchased. Simply unroll, line it up with the section, and smooth it out. Surface should be clean before attaching. The images show the flag (banner) attached to the most common garage door sizes; 8 feet and 16 feet by 7 feet high. Printed with UV inks, these banners resist fading. How to use our Garage Door Banners. The surface you put the magnet on needs to be clean. Typically you can just wipe it with a clean cloth. The magnet needs to be pliable when you put it up. If it has been in storage for awhile or it is cold, you may need to heat it in the sun (lay it flat) or in the house until it is pliable. With the larger sizes it helps to have two people to line it up. Magnets have a mind of their own. For storage, if you can lay it on a flat surface that is the best. But most of us need to roll and store. Roll it with the print face out. That helps when you go to put it up to make the curl go against the door and not away from it. Don’t roll it tight. The looser you can roll it the better. Over time the magnet will conform to the contours of the door it is on. When you go to store it, lay it on a flat surface in the sun (on a warm day) and most of the contours will straighten out. Prestalia e-commerce solutions.
Read moreHappy Flag Day 42″ x 84″ Magnetic Garage Banner For Steel Garage Doors
Happy Flag Day 42″ x 84″ Magnetic Garage Banner For Steel Garage Doors Dress up your steel garage door with this beautiful Happy Flag Day 42″ x 84″ Magnetic Garage Banner For Steel Garage Doors magnetic garage door magnet. This large magnetic banner is designed to fit in two sections on most standard steel sectional garage doors. Because it is magnetic it stays put when you open and close the garage door. Please NOTE the following BEFORE purchasing. This is for steel doors only. Check your door with a magnet. If the magnet sticks your door is steel. If not it is probably aluminum or wood. Your sections need to be 21″ tall, which is the standard size for most doors. Unlike other garage door banners, no other parts have to be purchased. Simply unroll, line it up with the section, and smooth it out. Surface should be clean before attaching. The images show the flag (banner) attached to the most common garage door sizes; 8 feet and 16 feet by 7 feet high. Printed with UV inks, these banners resist fading. How to use our Garage Door Banners. The surface you put the magnet on needs to be clean. Typically you can just wipe it with a clean cloth. The magnet needs to be pliable when you put it up. If it has been in storage for awhile or it is cold, you may need to heat it in the sun (lay it flat) or in the house until it is pliable. With the larger sizes it helps to have two people to line it up. Magnets have a mind of their own. For storage, if you can lay it on a flat surface that is the best. But most of us need to roll and store. Roll it with the print face out. That helps when you go to put it up to make the curl go against the door and not away from it. Don’t roll it tight. The looser you can roll it the better. Over time the magnet will conform to the contours of the door it is on. When you go to store it, lay it on a flat surface in the sun (on a warm day) and most of the contours will straighten out. Example Video Your browser does not support the video tag. Prestalia e-commerce solutions.
Read moreHappy Summer 42″ x 84″ Magnetic Garage Banner For Steel Garage Doors
Happy Summer 42″ x 84″ Magnetic Garage Banner For Steel Garage Doors Dress up your steel garage door with this beautiful Happy Summer 42″ x 84″ Magnetic Garage Banner For Steel Garage Doors magnetic garage door magnet. This large magnetic banner is designed to fit in two sections on most standard steel sectional garage doors. Because it is magnetic it stays put when you open and close the garage door. Please NOTE the following BEFORE purchasing. This is for steel doors only. Check your door with a magnet. If the magnet sticks your door is steel. If not it is probably aluminum or wood. Your sections need to be 21″ tall, which is the standard size for most doors. Unlike other garage door banners, no other parts have to be purchased. Simply unroll, line it up with the section, and smooth it out. Surface should be clean before attaching. The images show the flag (banner) attached to the most common garage door sizes; 8 feet and 16 feet by 7 feet high. Printed with UV inks, these banners resist fading. How to use our Garage Door Banners. The surface you put the magnet on needs to be clean. Typically you can just wipe it with a clean cloth. The magnet needs to be pliable when you put it up. If it has been in storage for awhile or it is cold, you may need to heat it in the sun (lay it flat) or in the house until it is pliable. With the larger sizes it helps to have two people to line it up. Magnets have a mind of their own. For storage, if you can lay it on a flat surface that is the best. But most of us need to roll and store. Roll it with the print face out. That helps when you go to put it up to make the curl go against the door and not away from it. Don’t roll it tight. The looser you can roll it the better. Over time the magnet will conform to the contours of the door it is on. When you go to store it, lay it on a flat surface in the sun (on a warm day) and most of the contours will straighten out. Example Video Your browser does not support the video tag. Prestalia e-commerce solutions.
Read moreMothers Day “We Love You Mom” Magnetic 42″ x 84″ Garage Banner For Steel Garage
Mothers Day “We Love You Mom” Magnetic 42″ x 84″ Garage Banner For Steel Garage Doors Dress up your steel garage door with this beautiful Mothers Day “We Love You Mom” Magnetic 42″ x 84″ Garage Banner For Steel Garage Doors magnetic garage door magnet. This large magnetic banner is designed to fit in two sections on most standard steel sectional garage doors. Because it is magnetic it stays put when you open and close the garage door. Please NOTE the following BEFORE purchasing. This is for steel doors only. Check your door with a magnet. If the magnet sticks your door is steel. If not it is probably aluminum or wood. Your sections need to be 21″ tall, which is the standard size for most doors. Unlike other garage door banners, no other parts have to be purchased. Simply unroll, line it up with the section, and smooth it out. Surface should be clean before attaching. The images show the flag (banner) attached to the most common garage door sizes; 8 feet and 16 feet by 7 feet high. Printed with UV inks, these banners resist fading. How to use our Garage Door Banners. The surface you put the magnet on needs to be clean. Typically you can just wipe it with a clean cloth. The magnet needs to be pliable when you put it up. If it has been in storage for awhile or it is cold, you may need to heat it in the sun (lay it flat) or in the house until it is pliable. With the larger sizes it helps to have two people to line it up. Magnets have a mind of their own. For storage, if you can lay it on a flat surface that is the best. But most of us need to roll and store. Roll it with the print face out. That helps when you go to put it up to make the curl go against the door and not away from it. Don’t roll it tight. The looser you can roll it the better. Over time the magnet will conform to the contours of the door it is on. When you go to store it, lay it on a flat surface in the sun (on a warm day) and most of the contours will straighten out. Prestalia e-commerce solutions.
Read moreHappy Fathers Day (All Star) 42″ x 84″ Magnetic Garage Banner For Steel Garage D
Happy Fathers Day (All Star) 42″ x 84″ Magnetic Garage Banner For Steel Garage Doors Dress up your steel garage door with this beautiful Happy Fathers Day (All Star) 42″ x 84″ Magnetic Garage Banner For Steel Garage Doors magnetic garage door magnet. This large magnetic banner is designed to fit in two sections on most standard steel sectional garage doors. Because it is magnetic it stays put when you open and close the garage door. Please NOTE the following BEFORE purchasing. This is for steel doors only. Check your door with a magnet. If the magnet sticks your door is steel. If not it is probably aluminum or wood. Your sections need to be 21″ tall, which is the standard size for most doors. Unlike other garage door banners, no other parts have to be purchased. Simply unroll, line it up with the section, and smooth it out. Surface should be clean before attaching. The images show the flag (banner) attached to the most common garage door sizes; 8 feet and 16 feet by 7 feet high. Printed with UV inks, these banners resist fading. How to use our Garage Door Banners. The surface you put the magnet on needs to be clean. Typically you can just wipe it with a clean cloth. The magnet needs to be pliable when you put it up. If it has been in storage for awhile or it is cold, you may need to heat it in the sun (lay it flat) or in the house until it is pliable. With the larger sizes it helps to have two people to line it up. Magnets have a mind of their own. For storage, if you can lay it on a flat surface that is the best. But most of us need to roll and store. Roll it with the print face out. That helps when you go to put it up to make the curl go against the door and not away from it. Don’t roll it tight. The looser you can roll it the better. Over time the magnet will conform to the contours of the door it is on. When you go to store it, lay it on a flat surface in the sun (on a warm day) and most of the contours will straighten out. Example Video Your browser does not support the video tag. Prestalia e-commerce solutions.
Read moreCelebrate Cinco De Mayo Magnetic 42″ x 84″ Garage Banner For Steel Garage Doors
Celebrate Cinco De Mayo Magnetic 42″ x 84″ Garage Banner For Steel Garage Doors Dress up your steel garage door with this beautiful Celebrate Cinco De Mayo Magnetic 42″ x 84″ Garage Banner For Steel Garage Doors magnetic garage door magnet. This large magnetic banner is designed to fit in two sections on most standard steel sectional garage doors. Because it is magnetic it stays put when you open and close the garage door. Please NOTE the following BEFORE purchasing. This is for steel doors only. Check your door with a magnet. If the magnet sticks your door is steel. If not it is probably aluminum or wood. Your sections need to be 21″ tall, which is the standard size for most doors. Unlike other garage door banners, no other parts have to be purchased. Simply unroll, line it up with the section, and smooth it out. Surface should be clean before attaching. The images show the flag (banner) attached to the most common garage door sizes; 8 feet and 16 feet by 7 feet high. Printed with UV inks, these banners resist fading. How to use our Garage Door Banners. The surface you put the magnet on needs to be clean. Typically you can just wipe it with a clean cloth. The magnet needs to be pliable when you put it up. If it has been in storage for awhile or it is cold, you may need to heat it in the sun (lay it flat) or in the house until it is pliable. With the larger sizes it helps to have two people to line it up. Magnets have a mind of their own. For storage, if you can lay it on a flat surface that is the best. But most of us need to roll and store. Roll it with the print face out. That helps when you go to put it up to make the curl go against the door and not away from it. Don’t roll it tight. The looser you can roll it the better. Over time the magnet will conform to the contours of the door it is on. When you go to store it, lay it on a flat surface in the sun (on a warm day) and most of the contours will straighten out. Prestalia e-commerce solutions.
Read moreNo Hunting No Shooting No Dumping Satellite Surveillance Sign Decal Security 42
Available As An Aluminum Sign / Magnetic Sign / Vinyl DecalAluminum Signs Are Available In Five Versions5″ x 7″ / 8″ x 12″ / 12″ x 18″Treated With Ultra UV Protection To Prevent FadingPrinted directly onto the metal signSigns do not have stickers, decals, paint or vinyl letteringWon’t fade, crack, peel, chip or rust.5″ x 7″ (.025 thickness) Signs have square corners, two strips of mounting tape and no holes8″ x 12″ (.025 thickness) Signs have rounded corners and are available in TWO OPTIONSAVAILABLE WITH 1/4″ MOUNTING HOLESALSO AVAILABLE WITHOUT MOUNTING HOLES BUT MOUNTING TAPE IS ATTACHED TO THE BACK OF THE SIGN8″ x 12″ (.032 thickness) Signs have rounded corners and two 1/4″ mounting holes12″ x 18″ (.032 thickness) Signs have rounded corners and two 1/4″ mounting holes Decals are 4″ X 6″Vinyl decals do not have holesPrinted with eco-solvent ink guaranteed to last 5 to 7 yearsDecals are shipped USPS First Class Mail with trackingCUSTOM DESIGN DECALS ALWAYS AVAILABLEMagnetic Signs Offer The Option Of Being RemovableYou can display the sign on your garage door or front door when you are expecting a deliveryand then remove it when no delivery is expectedPerfect if you’d prefer not to have a sign mounted permanentlyMagnetic signs are 7″ x 10″ or 5″ x 7″ and have no holesPLEASE CHECK TO MAKE SURE THAT MAGNETS STICKTO THE AREA THAT YOU PLAN TO USE THE MAGNETIC SIGNSome doors are aluminum and the signs may not stick
Read moreDallas Skyline – Texas Flag – Welcome Home 21″ x 42″ Magnetic Garage Banner For
Dallas Skyline – Texas Flag – Welcome Home 21″ x 42″ Magnetic Garage Banner For Steel Garage Doors Dress up your steel garage door with this beautiful Dallas Skyline – Texas Flag – Welcome Home 21″ x 42″ Magnetic Garage Banner For Steel Garage Doors magnetic garage door magnet. This large magnetic banner is designed to fit in two sections on most standard steel sectional garage doors. Because it is magnetic it stays put when you open and close the garage door. Please NOTE the following BEFORE purchasing. This is for steel doors only. Check your door with a magnet. If the magnet sticks your door is steel. If not it is probably aluminum or wood. Your sections need to be 21″ tall, which is the standard size for most doors. Unlike other garage door banners, no other parts have to be purchased. Simply unroll, line it up with the section, and smooth it out. Surface should be clean before attaching. The images show the flag (banner) attached to the most common garage door sizes; 8 feet and 16 feet by 7 feet high. Printed with UV inks, these banners resist fading. How to use our Garage Door Banners. The surface you put the magnet on needs to be clean. Typically you can just wipe it with a clean cloth. The magnet needs to be pliable when you put it up. If it has been in storage for awhile or it is cold, you may need to heat it in the sun (lay it flat) or in the house until it is pliable. With the larger sizes it helps to have two people to line it up. Magnets have a mind of their own. For storage, if you can lay it on a flat surface that is the best. But most of us need to roll and store. Roll it with the print face out. That helps when you go to put it up to make the curl go against the door and not away from it. Don’t roll it tight. The looser you can roll it the better. Over time the magnet will conform to the contours of the door it is on. When you go to store it, lay it on a flat surface in the sun (on a warm day) and most of the contours will straighten out. Example Video Your browser does not support the video tag. Prestalia e-commerce solutions.
Read moreStay Strong America 42″ x 84″ Magnetic Garage Banner For Steel Garage Doors
Stay Strong America 42″ x 84″ Magnetic Garage Banner For Steel Garage Doors Dress up your steel garage door with this beautiful Stay Strong America 42″ x 84″ Magnetic Garage Banner For Steel Garage Doors magnetic garage door magnet. This large magnetic banner is designed to fit in two sections on most standard steel sectional garage doors. Because it is magnetic it stays put when you open and close the garage door. Please NOTE the following BEFORE purchasing. This is for steel doors only. Check your door with a magnet. If the magnet sticks your door is steel. If not it is probably aluminum or wood. Your sections need to be 21″ tall, which is the standard size for most doors. Unlike other garage door banners, no other parts have to be purchased. Simply unroll, line it up with the section, and smooth it out. Surface should be clean before attaching. The images show the flag (banner) attached to the most common garage door sizes; 8 feet and 16 feet by 7 feet high. Printed with UV inks, these banners resist fading. How to use our Garage Door Banners. The surface you put the magnet on needs to be clean. Typically you can just wipe it with a clean cloth. The magnet needs to be pliable when you put it up. If it has been in storage for awhile or it is cold, you may need to heat it in the sun (lay it flat) or in the house until it is pliable. With the larger sizes it helps to have two people to line it up. Magnets have a mind of their own. For storage, if you can lay it on a flat surface that is the best. But most of us need to roll and store. Roll it with the print face out. That helps when you go to put it up to make the curl go against the door and not away from it. Don’t roll it tight. The looser you can roll it the better. Over time the magnet will conform to the contours of the door it is on. When you go to store it, lay it on a flat surface in the sun (on a warm day) and most of the contours will straighten out. Prestalia e-commerce solutions.
Read more