Archive
Galvanized Compact Steel Roll-up Sign Stand, Short Leg, Kick-Lever Leg-Release
Sign Stand, Foldable, Sign Compatibility Roll-Up, 38 in Max. Sign Size/Capacity, Compatible Sign Size 36 in x 36 in, 48 in x 48 in, Number of Legs 4, Telescoping Legs Yes, Leg Length Range 25 in to 38 in, Telescoping Mast No, Mast Height Range 15 in YOUR 100% SATISFACTION IS TOP PRIORITY! BHP SAFETY PRODUCTS main motivation is for our customers to be 100% satisfied with their purchase. If any consumer has something unsatisfactory with their product or transaction, please contact us immediately and we will do everything necessary to correct the problem and guarantee our promise. **TIME OF DELIVERY** BHP SAFETY PRODUCTS processes and ships orders Monday thru Friday 8:00AM – 5:00PM EST with the exception of National Holidays. We currently ship 93.8% of our orders the same day they are received and 99.6% within 24 hours. **WARRANTIES** We guarantee all of our products to be new and free from all manufacture imperfections. Factory defective items may be returned within 30 days of receipt. At which time a replacement will be sent at our expense or a complete refund of the transaction. **PAYMENT** We accept only PayPal **FEEDBACK** Our goal is to earn a 5 star rating from every business transaction. When you receive your product, please take a moment and post us a positive feedback. When your shipment leaves our warehouse, we will automatically post you a positive feedback! THANK YOU FOR SHOPPING WITH US!
Read moreSolid Steel Ground Spike For Swooper Flags
• 2.5 pounds• Dimensions: Length: 29.5″ | Diameter: 5/8″ with 1″ Heavy-duty Plastic throat for pole support | Pole goes into the ground 22″• Fits poles up to: 1 1/8″ diameter• Heavy-duty, Paint-coated steelOur heavy-duty swooper flag ground spike mount holds our swooper poles or any matching-fit flag pole in place, even during inclement weather. It is made of durable, solid steel and paint-coated to make it weather resistant. They are incredibly easy to install into any grass, dirt, or soil; you just push them in or tap them into the ground with a rubber hammer. Slide the pole over the top of the spike and assembly is complete!
Read more10 Pcs Sign Standoff Screws, Stainless Steel Glass Standoffs, Wall Standoff…
10 Pcs Sign Standoff Screws, Stainless Steel Glass Standoffs, Wall Standoff Mounts Advertising Screws, Glass Acrylic Fixing Standoff Nail Mounting Hardware Wall for Glass Sign Displays Product Details Superb Material: Our stand off wall mounts are made of high-quality stainless steel, which is wear-resistant, scratch-resistant, smooth and brigh in surface, strong and durable for long time use. They are premium standoff mounts with solid construction and exquisite craft, can retain shine with metallic lustre for long time without surface modification treatment. Easy to Install: The sign standoff screw does not require a clumsy frame, which is very easy to install. First, you need to fix the expansion tube on a solid wall or wooden board, and then fix the bottom of the advertising nail on the wall with screws. Then put it on the glass panel. Finally tighten the screws and everything is ready. Professional Design: Through-style design of the sign standoff fixings eliminates the need for a frame, each advertising nail is equipped with a rubber pad, which can protect the billboard and prevent the screws from leaving scratches on the glass. The standoff sign fixing is designed to fix the sign without a frame, which is very convenient. Wide Application: This glass standoff fixing screw can be used widely in glass door, glass cabinet, shower door, stairs handrails, glass railing, glass display or panel, countertop, etc. Suitable for fixing signs, billboards, building panels, glass, photos, etc. These gaskets can be used indoors and outdoors. No frame required, easy to install and durable. Package Includes: These wall standoffs screws are suitable for indoor or outdoor use. You will receive 10 set sign holder standoff screws, including screws, which is enough for your daily use. You only need to drill a small hole in the wall to mount the billboard on the wall.
Read more6FT UPVC Realtor Yard Sign Post w/ Steel Stake for Garage Sale Rent Open House
Color: Black Material: UPVC, Steel Overall Dimensions: 72″ x 36″ (L X H) Post: 4″ x 4″ x 72″ (L x W X H) Arm: 3.5″ x 2″ x 36″ (L x W X H) Net Weight: 17.6 lbs Package includes: 1 x 72″ post 1 x 36″ arm 1 x power stake 1 x retaining key 2 x arm caps 2 x steel rider clips 2 x steel sign clips 1 x user manual SHOP NOW ▌ PRODUCT DETAILS: Description: Discover the durability and elegance of our 6FT real estate sign post, crafted from superior UPVC material that is waterproof, weather-resistant, non-cracking and aging-resistant. This heavy-duty sign post features a rustproof steel power stake and an internal locking key for stability in any weather, ensuring your real estate ads always stand out. Effortlessly accommodate various sign sizes, perfect for property sales, rentals, or unique outdoor displays. Installation is a breeze with our no-digging design, requiring only a hammer for a quick setup. Each package includes a 6FT post, 36″ arm, and all necessary accessories (note: sign not included). In addition to being used as a real estate sign post, it can also be used as a welcome sign post, farm signage, and even as a birdcage or bird bath frame, making every display a standout. Features: Realtor yard sign post for open house and home for sale Internal locking key is used for stabilizing the arm and post Thickened metal stake prevents the post from falling in the wind Hold 6″ x 24″ rider, hold hanging sign panel 18″ x 24″ or 24″ x 24″ Hassle-free installation with only a hammer, no digging required Superior UPVC Material is weather-resistant, non-cracking, aging-resistant 4” x 4” post cap, 2” x 3.5” arm end caps, 2″ x 3.5″ rider clips and sign clips included Specifications： Color: Black Material: UPVC, Steel Overall Dimensions: 72″ x 36″ (L X H) Post: 4″ x 4″ x 72″ (L x W X H) Arm: 3.5″ x 2″ x 36″ (L x W X H) Net Weight: 17.6 lbs Package includes: 1 x 72″ post 1 x 36″ arm 1 x power stake 1 x retaining key 2 x arm caps 2 x steel rider clips 2 x steel sign clips 1 x user manual ▌ Contact & Returns:If you have questions about purchases from us contact us through eBay’s Message Center. Items should be returned in their original product packaging and all accessories in the original shipment must be included if you would return the item. ▌ Shippment: • Free Standard Shipping on all items. • All orders are shipped out via UPS, USPS or LTL. • Transit time is 2-7 business days varying on customer’s location to fulfillment center. • Tracking numbers will be automatically updated once order is shipped. • We only ship to the Lower 48 States, no current shipping to Hawaii, Alaska, Puerto Rico, nor Guam. • We do not ship to FPO, APO or PO Boxes.
Read moreWE BUY GOLD Signicade 24×36 Aframe Sidewalk Sign Banner Decal PAWN SILVER
TAMPA PRINTING IS OPEN FOR BUSINESS. We are currently operating under normal production and shipping schedules. We care deeply about keeping our employees and customers safe and healthy. We are diligently practicing safety measures within our facility to ensure that each employee is safe and protected. These include social distancing and frequent sanitizing of all areas and high-touch surfaces. These measures will also help keep your packaging and product safe and protected. PRODUCT DESCRIPTION: This listing has 6 variations. The different PRODUCT DESCRIPTIONS are listed below: STANDARD A-FRAME SIGNICADE: Tampa Printing offers 2 unique versions of this white heavy-duty A-Frame Sign. The Standard version includes the plastic A-Frame stand with 2 decals applied directly onto both sides. The graphics are all digitally printed on UV and water resistant, heavy-duty vinyl. We use ultra durable, industry best, fade proof latex inks for a scratch resistant finish that will last for years. Both Stand types are hollow and can be filled with water or sand for increased stability. The print area dimensions are 24 inches wide by 36 inches tall. DELUXE A-FRAME SIGNICADE: Our second unique version of this white heavy-duty A-Frame Sign is our Deluxe version. It includes the plastic A-Frame stand with the graphic decals applied to two 24″ wide by 36″ tall, single-sided corrugated plastic panels that can then slide onto the Stand and hold in place by Stay Tabs that are a part of the Stand. The graphics are all digitally printed on UV and water resistant, heavy-duty vinyl. We use ultra durable, industry best, fade proof latex inks for a scratch resistant finish that will last for years. Both Stand types are hollow and can be filled with water or sand for increased stability. The print area dimensions are 24 inches wide by 36 inches tall. PEEL-n-STICK DECALS: Pack of two (2) 24″ wide by 36″ tall Peel-n-Stick Decals. This item comes as a 2 pack. The Peel-n-Stick Graphic Decals are perfect for those who do not need an A-Frame stand to hold the decals, or for those who already have a Standard A-Frame stand and just need extra Decals to apply to the stand. The graphics are all digitally printed on UV and water resistant, heavy-duty vinyl. We use ultra durable, industry best, fade proof latex inks for a scratch resistant finish that will last for years. CORRUGATED PLASTIC PANELS WITH GRAPHICS APPLIED TO 1 SIDE: Pack of two (2) 24″ wide by 36″ tall 4mm Corrugated Plastic Panels with graphics applied to 1 side. This item comes as a 2 pack. The corrugated plastic panels are perfect for those who do not need an A-Frame stand to hold the panels, or for those who already have an A-Frame stand and just need extra inserts. The graphics are all digitally printed on UV and water resistant, heavy-duty vinyl. We use ultra durable, industry best, fade proof latex inks for a scratch resistant finish that will last for years. STANDARD A-FRAME SIGNICADE ONLY: Tampa Printing offers 2 unique versions of this white heavy-duty A-Frame Sign. The Standard version includes the plastic A-Frame stand ONLY. NO Graphics are included with this listing. Both Stand types are hollow and can be filled with water or sand for increased stability. The print area dimensions are 24 inches wide by 36 inches tall. DELUXE A-FRAME SIGNICADE ONLY: Tampa Printing offers 2 unique versions of this white heavy-duty A-Frame Sign. The Deluxe version also includes the plastic A-Frame stand ONLY. NO Graphics are included with this listing. Both Stand types are hollow and can be filled with water or sand for increased stability. The print area dimensions are 24 inches wide by 36 inches tall. TO MESSAGE US: Hover cursor over My ebay at top of page. Select “Purchase History”. Scroll to your order. Click on the “More Actions” link on the right side of the screen, below the Leave Feedback button. Select “Contact Seller”. Under “Select Topic” choose “I have a question about using my item or I want to send the seller a message” . Click the “Contact the Seller” blue button. On the next screen type in your message. PRODUCTION/SHIPPING: Our A-Frame, Decal, and Panel product production is REALLY FAST! Our normal business hours are Mon-Fri, 9am-5pm EST, excluding holidays.
Read moreWE BUY GOLD Signicade 24×36 Aframe Sidewalk Sign Banner Decal PAWN SILVER
TAMPA PRINTING IS OPEN FOR BUSINESS. We are currently operating under normal production and shipping schedules. We care deeply about keeping our employees and customers safe and healthy. We are diligently practicing safety measures within our facility to ensure that each employee is safe and protected. These include social distancing and frequent sanitizing of all areas and high-touch surfaces. These measures will also help keep your packaging and product safe and protected. PRODUCT DESCRIPTION: This listing has 6 variations. The different PRODUCT DESCRIPTIONS are listed below: STANDARD A-FRAME SIGNICADE: Tampa Printing offers 2 unique versions of this white heavy-duty A-Frame Sign. The Standard version includes the plastic A-Frame stand with 2 decals applied directly onto both sides. The graphics are all digitally printed on UV and water resistant, heavy-duty vinyl. We use ultra durable, industry best, fade proof latex inks for a scratch resistant finish that will last for years. Both Stand types are hollow and can be filled with water or sand for increased stability. The print area dimensions are 24 inches wide by 36 inches tall. DELUXE A-FRAME SIGNICADE: Our second unique version of this white heavy-duty A-Frame Sign is our Deluxe version. It includes the plastic A-Frame stand with the graphic decals applied to two 24″ wide by 36″ tall, single-sided corrugated plastic panels that can then slide onto the Stand and hold in place by Stay Tabs that are a part of the Stand. The graphics are all digitally printed on UV and water resistant, heavy-duty vinyl. We use ultra durable, industry best, fade proof latex inks for a scratch resistant finish that will last for years. Both Stand types are hollow and can be filled with water or sand for increased stability. The print area dimensions are 24 inches wide by 36 inches tall. PEEL-n-STICK DECALS: Pack of two (2) 24″ wide by 36″ tall Peel-n-Stick Decals. This item comes as a 2 pack. The Peel-n-Stick Graphic Decals are perfect for those who do not need an A-Frame stand to hold the decals, or for those who already have a Standard A-Frame stand and just need extra Decals to apply to the stand. The graphics are all digitally printed on UV and water resistant, heavy-duty vinyl. We use ultra durable, industry best, fade proof latex inks for a scratch resistant finish that will last for years. CORRUGATED PLASTIC PANELS WITH GRAPHICS APPLIED TO 1 SIDE: Pack of two (2) 24″ wide by 36″ tall 4mm Corrugated Plastic Panels with graphics applied to 1 side. This item comes as a 2 pack. The corrugated plastic panels are perfect for those who do not need an A-Frame stand to hold the panels, or for those who already have an A-Frame stand and just need extra inserts. The graphics are all digitally printed on UV and water resistant, heavy-duty vinyl. We use ultra durable, industry best, fade proof latex inks for a scratch resistant finish that will last for years. STANDARD A-FRAME SIGNICADE ONLY: Tampa Printing offers 2 unique versions of this white heavy-duty A-Frame Sign. The Standard version includes the plastic A-Frame stand ONLY. NO Graphics are included with this listing. Both Stand types are hollow and can be filled with water or sand for increased stability. The print area dimensions are 24 inches wide by 36 inches tall. DELUXE A-FRAME SIGNICADE ONLY: Tampa Printing offers 2 unique versions of this white heavy-duty A-Frame Sign. The Deluxe version also includes the plastic A-Frame stand ONLY. NO Graphics are included with this listing. Both Stand types are hollow and can be filled with water or sand for increased stability. The print area dimensions are 24 inches wide by 36 inches tall. TO MESSAGE US: Hover cursor over My ebay at top of page. Select “Purchase History”. Scroll to your order. Click on the “More Actions” link on the right side of the screen, below the Leave Feedback button. Select “Contact Seller”. Under “Select Topic” choose “I have a question about using my item or I want to send the seller a message” . Click the “Contact the Seller” blue button. On the next screen type in your message. PRODUCTION/SHIPPING: Our A-Frame, Decal, and Panel product production is REALLY FAST! Our normal business hours are Mon-Fri, 9am-5pm EST, excluding holidays.
Read moreWe Buy Silver Premium Windless Feather Flag Bundle (Complete Kit) OR Optional Re
We Buy Silver Premium Windless Feather Flag Bundle (Complete Kit) OR Optional Replacement Flag Only Our We Buy Silver Premium Windless Flag is digitally printed using UV fade-resistant inks on high quality flag material, so our Premium flags last 2 to 3 times longer than our standard stock flags. This flag is 11.5 feet tall and when placed on our 15 foot long hybrid banner flagpole (available as an option) stands at a stately 14 feet tall. This very attractive 11.5 foot tall by 3 foot wide flag brilliantly announces your message and really attracts attention. You SAVE 20% off Retail when you buy our We Buy Silver Premium Windless Premium Windless Flag as a bundle. To save on the bundle select the Kit option from the boxes above and get all you need to set up and fly this beautiful flag. The Flag Kit Bundle features this 11.5 foot tall flag, a 15 foot long hybrid banner flagpole, and a ground mount stake (for use in grass or turf). You also receive a complimentary flag clip, which is used to reduce wear at the top end of the flag. Options You can purchase our We Buy Silver Premium Windless Premium Windless Flag alone as a replacement flag, or as a bundled kit with all you need to set up and fly this flag on grass or turf. You can select the Bundled Kit by using the box that says Kit. For the replacement flag click on the box that says Flag Only. Our flag kit is very easy to assemble, so you can have your flag up in minutes, and with the estimated daily cost of this form of outdoor advertising at 30 cents a day, you will be enjoying one of the best advertising values available. SKUs: Flag Only , Kit UPCs: Flag Only , Kit Information This is a huge flag. When placed on our 15 foot long hybrid banner flagpole (available as an optional bundle) it stands at a stately 14 feet tall (as tall as two NBA players, with one standing on the others shoulders). This very attractive 11.5 foot tall by 3 foot wide windless-style flag brilliantly announces your message and really attracts attention. Not only is our We Buy Silver Premium Windless Premium Windless flag easy to set up and use, this windless-style feather flag is also one of the most economical advertising techniques available, especially for advertising outdoors. We calculate the per day cost to you by figuring that if you purchase a complete kit and one additional flag at one time you will spend about $109.98, plus shipping. Conservatively, these two will last a year, and usually a lot longer (depending on your specific conditions). Changing out your advertising flags more often than is necessary keeps them looking their best, keeps a fresh, bright presence and gives your location a highly professional impression, while attracting attention to your flag signage. So the total cost of this awesome form of outdoor advertising, a Vista Flags feather banner flag with pole and mount, is only about 30 cents per day! That is a great value for any kind of outdoor advertising! Windless Flags Windless flags have the top part of the pole sleeve go all the way to the end of the flag. That allows the message to always be available even in no-wind conditions. Flutter flags (aka Swooper flags) have the sleeve stop 8-12″ short of the end so they can flutter in the wind. Attracting attention, but the text is only partially readable. You are purchasing a WINDLESS-Style flag. Windless Feather Advertising Flags are generally preferred by most people because, unlike regular flags or our Flutter-style flags, Windless Feather Flags don’t require wind to present your message. Our windless flag is at its best an any kind of weather and is perfect for using indoors. Feather Flags Feather advertising flags are called feather because of their shape. Feather advertising flags, whether you prefer windless or flutter style, are a great advertising product for outside and even for inside, at a great price. We get a lot of questions about the name of the flags. We call our feather advertising flags either windless or flutter, depending on the way the sleeve is attached to the flag. Other people use different names like Blade flags, Tall flags, Flying Banners, Bowhead Banners, Windfeather Flags, Bow Flag, Wind Sail Sign, Windblade Flag and Flying Blade flags. Some refer to them as Swooper flags. Swooper Flags are equivalent to our Flutter-style flags as are Super flags. Most of our feather flags are 3 feet wide, where other vendors often limit the width to 2.5 feet or even 2 feet in some cases. The 3 foot wide feather flags, especially at 11-12 feet tall look so much better, and you are getting more square footage of advertising area. We have never been fans of teardrop-style flags and while they are technically feather flags they don’t provide enough advertising area to justify their existence. Teardrop flags are cute though. Feather advertising flags are called feather because of their shape. Feather advertising flags, whether you prefer windless or flutter style, are a great advertising product for outside and even for inside, at a great price. Printing Most of our premium flags are printed on two sides using a heat press so there is as much ink on the front as the back. This makes for a beautiful, long-lasting image. Many of our flags are digitally printed or screen printed and the ink “bleeds through” the fabric so the image is visible on the back side. These printing types (digital or screen) gets varying amounts of ink through. Screen printed flags tend to be very bright on the back side of the flag while digitally printed flags will vary on the amount of penetration by color. While exact penetration percentages are really just guesses, we calculate we generally get 95% bleed through on screen printed (most of our stock flags) and 85-95% on our digitally printed flags, which would include some of our custom flags, our premium flags and a few of our stock designs. With all of our print techniques, except double-sided flags, the back side image is reversed. This is generally not an issue for readability, but it is the reason we generally run our main message vertically, because vertical lettering is fairly easy to read in the reverse. It is the easiest to read from either side, followed by horizontal print. Horizontal lettering running top to bottom (or bottom to top) is very easily read on the front side, but the reverse side is almost impossible to read. Our minds simply go in that direction. If you need to run your message from bottom to top consider one of our two-sided Custom Flags. They are very readable from both sides. Instructions If you are purchasing this flag as a replacement flag for our flag kit here are the steps you will need to follow. If you are purchasing this as a new install scroll down until you see the word “NEW INSTALL” in red and follow the steps from there. Note: Your packing slip will also come with instructions. REPLACING YOUR FLAG. Should take about 3-5 minutes tops. 1) Remove the little black clip from the top of the pole. Sometimes these get hidden in the sleeve, but it should be there. It is probably going to be on there tight, so you may have to pull hard. Keep the clip to put on the new flag after you have installed it. We try to send a new one out with every replacement flag. 2) Remove the old flag from the pole by sliding it off the pole. The pole comes apart in sections so try not to separate the sections while pulling off the flag. If they do come apart it isn’t a problem, but it will be harder to get the little rascals out of the flag sleeve. It helps to have two people work together on this, but I have done it many times by myself. 3) Put all the pieces of the pole back together if they have come apart. 4) Find the sleeve opening on the new flag. One side will be sewn closed and one open. 5) Slide the flag pole up the sleeve until it gets to the very end. 6) Put the black clip at the top of the pole just behind the black tip piece. 7) Put the whole thing back on the mount. 8) Step back and admire your new flag! NEW INSTALL Putting together this flag kit/bundle should take about 3-5 minutes tops. You will need a hammer to put the ground mount stake into the grass or turf. 1) Remove the little black clip from the top of the pole. This is located near the bright stickers that say “do not discard black clamp.” It is probably going to be on there tight, so you may have to pull hard. Keep the black clamp to put on the flag after you have installed it. It will go about the same place on the pole as you took it off; over the flag sleeve and as close to the top as it will fit. 2) Find the Ground Mount Stake. This will be either orange in color or silver depending on where we get them. You will need a large hammer for this part. Locate a suitable location for your flag. Grass or turf works best. If your ground is hard, soften it with water before hammering the stake in. Here are some considerations: The flag will need a clear 3 foot radius from ground mount, so keep it away from bushes, signs, tree limbs, ect. It is fabric, so if it snags on things it will tear. Don’t put your ground mount stake near your sprinkler lines. You don’t want to create a geyser. Try to keep it ground mount stake as vertical as possible. These flags look their best when the pole is straight up and down. The flags, when put on the 15 foot pole need about 14 feet of clearance overhead. 3) Assemble the pole. The pole is in sections. There are two fiberglass pieces, these go together at the top so the pole can take the shape of the flag sleeve. The thinner piece goes into the larger piece at the top. These two pieces will go into the aluminum pieces. One of the aluminum pole pieces is dimpled so it can fit into the other pole piece. It doesn’t matter which end goes up. Put the fiberglass piece with the black end into the aluminum pole and you have put together the pole. 4) Find the sleeve opening on the new flag. One end will be closed and one open. 5) Slide the flag pole up the sleeve until it gets to the very end. 6) Put the black clip at the top of the pole just behind the black tip piece. (In the wind the end of the fiberglass pole will vibrate, hitting the sleeve and creating a hole. With the clip/clamp we prevent that by holding the pole against the sleeve.) 7) Put the whole thing over the top of the mount. The ground mount has a piece of PVC which goes into the flag pole at the bottom. The PVC’s job is to keep the pole from hitting the top of the ground mount. This protects the pole from being cut by the ground mount, should you need to have hit it hard enough to make it mushroom. The PVC piece has some foam in it to help keep it on the stake during shipping and use. Over time that foam may be flattened or come unglued. That is not a problem, since the main issue is that the PVC remain available to protect the pole. Prestalia e-commerce solutions.
Read moreWe Buy Silver Premium Windless Feather Flag Bundle (Complete Kit) OR Optional Re
We Buy Silver Premium Windless Feather Flag Bundle (Complete Kit) OR Optional Replacement Flag Only Our We Buy Silver Premium Windless Flag is digitally printed using UV fade-resistant inks on high quality flag material, so our Premium flags last 2 to 3 times longer than our standard stock flags. This flag is 11.5 feet tall and when placed on our 15 foot long hybrid banner flagpole (available as an option) stands at a stately 14 feet tall. This very attractive 11.5 foot tall by 3 foot wide flag brilliantly announces your message and really attracts attention. You SAVE 20% off Retail when you buy our We Buy Silver Premium Windless Premium Windless Flag as a bundle. To save on the bundle select the Kit option from the boxes above and get all you need to set up and fly this beautiful flag. The Flag Kit Bundle features this 11.5 foot tall flag, a 15 foot long hybrid banner flagpole, and a ground mount stake (for use in grass or turf). You also receive a complimentary flag clip, which is used to reduce wear at the top end of the flag. Options You can purchase our We Buy Silver Premium Windless Premium Windless Flag alone as a replacement flag, or as a bundled kit with all you need to set up and fly this flag on grass or turf. You can select the Bundled Kit by using the box that says Kit. For the replacement flag click on the box that says Flag Only. Our flag kit is very easy to assemble, so you can have your flag up in minutes, and with the estimated daily cost of this form of outdoor advertising at 30 cents a day, you will be enjoying one of the best advertising values available. SKUs: Flag Only , Kit UPCs: Flag Only , Kit Information This is a huge flag. When placed on our 15 foot long hybrid banner flagpole (available as an optional bundle) it stands at a stately 14 feet tall (as tall as two NBA players, with one standing on the others shoulders). This very attractive 11.5 foot tall by 3 foot wide windless-style flag brilliantly announces your message and really attracts attention. Not only is our We Buy Silver Premium Windless Premium Windless flag easy to set up and use, this windless-style feather flag is also one of the most economical advertising techniques available, especially for advertising outdoors. We calculate the per day cost to you by figuring that if you purchase a complete kit and one additional flag at one time you will spend about $109.98, plus shipping. Conservatively, these two will last a year, and usually a lot longer (depending on your specific conditions). Changing out your advertising flags more often than is necessary keeps them looking their best, keeps a fresh, bright presence and gives your location a highly professional impression, while attracting attention to your flag signage. So the total cost of this awesome form of outdoor advertising, a Vista Flags feather banner flag with pole and mount, is only about 30 cents per day! That is a great value for any kind of outdoor advertising! Windless Flags Windless flags have the top part of the pole sleeve go all the way to the end of the flag. That allows the message to always be available even in no-wind conditions. Flutter flags (aka Swooper flags) have the sleeve stop 8-12″ short of the end so they can flutter in the wind. Attracting attention, but the text is only partially readable. You are purchasing a WINDLESS-Style flag. Windless Feather Advertising Flags are generally preferred by most people because, unlike regular flags or our Flutter-style flags, Windless Feather Flags don’t require wind to present your message. Our windless flag is at its best an any kind of weather and is perfect for using indoors. Feather Flags Feather advertising flags are called feather because of their shape. Feather advertising flags, whether you prefer windless or flutter style, are a great advertising product for outside and even for inside, at a great price. We get a lot of questions about the name of the flags. We call our feather advertising flags either windless or flutter, depending on the way the sleeve is attached to the flag. Other people use different names like Blade flags, Tall flags, Flying Banners, Bowhead Banners, Windfeather Flags, Bow Flag, Wind Sail Sign, Windblade Flag and Flying Blade flags. Some refer to them as Swooper flags. Swooper Flags are equivalent to our Flutter-style flags as are Super flags. Most of our feather flags are 3 feet wide, where other vendors often limit the width to 2.5 feet or even 2 feet in some cases. The 3 foot wide feather flags, especially at 11-12 feet tall look so much better, and you are getting more square footage of advertising area. We have never been fans of teardrop-style flags and while they are technically feather flags they don’t provide enough advertising area to justify their existence. Teardrop flags are cute though. Feather advertising flags are called feather because of their shape. Feather advertising flags, whether you prefer windless or flutter style, are a great advertising product for outside and even for inside, at a great price. Printing Most of our premium flags are printed on two sides using a heat press so there is as much ink on the front as the back. This makes for a beautiful, long-lasting image. Many of our flags are digitally printed or screen printed and the ink “bleeds through” the fabric so the image is visible on the back side. These printing types (digital or screen) gets varying amounts of ink through. Screen printed flags tend to be very bright on the back side of the flag while digitally printed flags will vary on the amount of penetration by color. While exact penetration percentages are really just guesses, we calculate we generally get 95% bleed through on screen printed (most of our stock flags) and 85-95% on our digitally printed flags, which would include some of our custom flags, our premium flags and a few of our stock designs. With all of our print techniques, except double-sided flags, the back side image is reversed. This is generally not an issue for readability, but it is the reason we generally run our main message vertically, because vertical lettering is fairly easy to read in the reverse. It is the easiest to read from either side, followed by horizontal print. Horizontal lettering running top to bottom (or bottom to top) is very easily read on the front side, but the reverse side is almost impossible to read. Our minds simply go in that direction. If you need to run your message from bottom to top consider one of our two-sided Custom Flags. They are very readable from both sides. Instructions If you are purchasing this flag as a replacement flag for our flag kit here are the steps you will need to follow. If you are purchasing this as a new install scroll down until you see the word “NEW INSTALL” in red and follow the steps from there. Note: Your packing slip will also come with instructions. REPLACING YOUR FLAG. Should take about 3-5 minutes tops. 1) Remove the little black clip from the top of the pole. Sometimes these get hidden in the sleeve, but it should be there. It is probably going to be on there tight, so you may have to pull hard. Keep the clip to put on the new flag after you have installed it. We try to send a new one out with every replacement flag. 2) Remove the old flag from the pole by sliding it off the pole. The pole comes apart in sections so try not to separate the sections while pulling off the flag. If they do come apart it isn’t a problem, but it will be harder to get the little rascals out of the flag sleeve. It helps to have two people work together on this, but I have done it many times by myself. 3) Put all the pieces of the pole back together if they have come apart. 4) Find the sleeve opening on the new flag. One side will be sewn closed and one open. 5) Slide the flag pole up the sleeve until it gets to the very end. 6) Put the black clip at the top of the pole just behind the black tip piece. 7) Put the whole thing back on the mount. 8) Step back and admire your new flag! NEW INSTALL Putting together this flag kit/bundle should take about 3-5 minutes tops. You will need a hammer to put the ground mount stake into the grass or turf. 1) Remove the little black clip from the top of the pole. This is located near the bright stickers that say “do not discard black clamp.” It is probably going to be on there tight, so you may have to pull hard. Keep the black clamp to put on the flag after you have installed it. It will go about the same place on the pole as you took it off; over the flag sleeve and as close to the top as it will fit. 2) Find the Ground Mount Stake. This will be either orange in color or silver depending on where we get them. You will need a large hammer for this part. Locate a suitable location for your flag. Grass or turf works best. If your ground is hard, soften it with water before hammering the stake in. Here are some considerations: The flag will need a clear 3 foot radius from ground mount, so keep it away from bushes, signs, tree limbs, ect. It is fabric, so if it snags on things it will tear. Don’t put your ground mount stake near your sprinkler lines. You don’t want to create a geyser. Try to keep it ground mount stake as vertical as possible. These flags look their best when the pole is straight up and down. The flags, when put on the 15 foot pole need about 14 feet of clearance overhead. 3) Assemble the pole. The pole is in sections. There are two fiberglass pieces, these go together at the top so the pole can take the shape of the flag sleeve. The thinner piece goes into the larger piece at the top. These two pieces will go into the aluminum pieces. One of the aluminum pole pieces is dimpled so it can fit into the other pole piece. It doesn’t matter which end goes up. Put the fiberglass piece with the black end into the aluminum pole and you have put together the pole. 4) Find the sleeve opening on the new flag. One end will be closed and one open. 5) Slide the flag pole up the sleeve until it gets to the very end. 6) Put the black clip at the top of the pole just behind the black tip piece. (In the wind the end of the fiberglass pole will vibrate, hitting the sleeve and creating a hole. With the clip/clamp we prevent that by holding the pole against the sleeve.) 7) Put the whole thing over the top of the mount. The ground mount has a piece of PVC which goes into the flag pole at the bottom. The PVC’s job is to keep the pole from hitting the top of the ground mount. This protects the pole from being cut by the ground mount, should you need to have hit it hard enough to make it mushroom. The PVC piece has some foam in it to help keep it on the stake during shipping and use. Over time that foam may be flattened or come unglued. That is not a problem, since the main issue is that the PVC remain available to protect the pole. Prestalia e-commerce solutions.
Read more10 Pack SILVER Yard Signs Circles 17.5″ & 10 H-STAKES
-DURABLE CONSTRUCTION. Resembling corrugated cardboard but far more durable, these plastic sheets are expertly crafted out of polypropylene to provide long-lasting strength and use. The material has a high resistance to electricity and is chemical- and mildew-resistant, making it ideal for use in any environment. -VERSATILE USE. These sheets can be fabricated into an endless number of configurations for home, office, retail, farm and factory applications. From printable signage and garden borders, all the way through to reusable shipping and storage containers, you’ll find hundreds of uses for this versatile product. -ELASTIC MATERIAL. Rugged, resilient, reusable and resistant to weather and abuse, these sheets can be formed for different kinds of uses. The elastic material can be scored, creased, stapled, nailed, stitched, glued, folded and drilled, retaining its shape even after continual bending or flexing. -CHOICE COLOR. Adaptable for different applications, these plastic sheets are available in 18″ DIAMETER . -NINE VIBRANT COLORS AVAILABLE black, white, yellow,green,grey,red ,orange,light blue,dark blue – these sheets will provide long-term use. You can purchase one color to complement your taste, style or interior design, or purchase different shades so you can color-code your applications. You are buying 10 Qty Blank SILVER Yard Signs Circles 17.5″ with H-STAKES All of our dimensions are NOMINAL. There is a tolerance of (+/-)1/8″ or 0.118″We also can do custom cuts, a minimum of 10 pieces. We cannot cut anything under 6″. Please message us before placing your order to get a quote.We offer other materials – please see store.We also build vacuum forming machines, roller die cutters, drying ovens, and CNC routers.We sell Infrared Heaters, Vacuum Pumps, and Vacuum Systems.Please message us for any further questions. Shipping•Your order will be shipped within 1-3 business days once we receive your payment. If you pay by e-check, we will ship your order once your payment is cleared. We do not ship on weekend or public holidays •A shipping notification with a tracking number will be emailed to you once your order has been shipped. Please note there is not always a tracking number for international orders. We are not responsible for the time frame of delivery for the shipment. Once we ship your package, the carrier is responsible for the timing of the delivery. •We are not responsible for any customs duty incurred at foreign customs. Or any hold ups with customs. Please note that international orders can hold in customs for ups to 45 days, no questions asked. Payment & Return•Payment is accepted via PayPal, Custom orders can be place through us, please message us about custom cuts. If a message is not sent to us before the purchase, there’s no guarantee the piece will be cut. •Items can be returned for exchange or refund within 30 days from the date you receive your merchandise. We are not responsible for any purchase after a 30-day period. Also shipping paid for the product is not refunded for returns that include your own reasoning for return, such as it does not work for your application or no longer need it. There is also a 20% restocking fee. •Return shipping is the responsibility of buyer.•If you have a problem with your order please contact us first. We are always willing to work things out.
Read more10 Pack SILVER Yard Signs Circles 17.5″ & 10 H-STAKES
-DURABLE CONSTRUCTION. Resembling corrugated cardboard but far more durable, these plastic sheets are expertly crafted out of polypropylene to provide long-lasting strength and use. The material has a high resistance to electricity and is chemical- and mildew-resistant, making it ideal for use in any environment. -VERSATILE USE. These sheets can be fabricated into an endless number of configurations for home, office, retail, farm and factory applications. From printable signage and garden borders, all the way through to reusable shipping and storage containers, you’ll find hundreds of uses for this versatile product. -ELASTIC MATERIAL. Rugged, resilient, reusable and resistant to weather and abuse, these sheets can be formed for different kinds of uses. The elastic material can be scored, creased, stapled, nailed, stitched, glued, folded and drilled, retaining its shape even after continual bending or flexing. -CHOICE COLOR. Adaptable for different applications, these plastic sheets are available in 18″ DIAMETER . -NINE VIBRANT COLORS AVAILABLE black, white, yellow,green,grey,red ,orange,light blue,dark blue – these sheets will provide long-term use. You can purchase one color to complement your taste, style or interior design, or purchase different shades so you can color-code your applications. You are buying 10 Qty Blank SILVER Yard Signs Circles 17.5″ with H-STAKES All of our dimensions are NOMINAL. There is a tolerance of (+/-)1/8″ or 0.118″We also can do custom cuts, a minimum of 10 pieces. We cannot cut anything under 6″. Please message us before placing your order to get a quote.We offer other materials – please see store.We also build vacuum forming machines, roller die cutters, drying ovens, and CNC routers.We sell Infrared Heaters, Vacuum Pumps, and Vacuum Systems.Please message us for any further questions. Shipping•Your order will be shipped within 1-3 business days once we receive your payment. If you pay by e-check, we will ship your order once your payment is cleared. We do not ship on weekend or public holidays •A shipping notification with a tracking number will be emailed to you once your order has been shipped. Please note there is not always a tracking number for international orders. We are not responsible for the time frame of delivery for the shipment. Once we ship your package, the carrier is responsible for the timing of the delivery. •We are not responsible for any customs duty incurred at foreign customs. Or any hold ups with customs. Please note that international orders can hold in customs for ups to 45 days, no questions asked. Payment & Return•Payment is accepted via PayPal, Custom orders can be place through us, please message us about custom cuts. If a message is not sent to us before the purchase, there’s no guarantee the piece will be cut. •Items can be returned for exchange or refund within 30 days from the date you receive your merchandise. We are not responsible for any purchase after a 30-day period. Also shipping paid for the product is not refunded for returns that include your own reasoning for return, such as it does not work for your application or no longer need it. There is also a 20% restocking fee. •Return shipping is the responsibility of buyer.•If you have a problem with your order please contact us first. We are always willing to work things out.
Read more